The dome is made from polyester–glass laminate of up to 6 mm thickness, providing full resistance to weather conditions, and ensuring high durability and aesthetics at the same time. In addition, it is reinforced by special convex profiles on the outside of the mazer and reinforcements placed inside the structure. The dome is made up of 7 basic elements – it strongly facilitates transport and the assembly on the high buildings.
The tightness of the dome is guaranteed by its special construction which also prevents the leaking of water inside. The large gap at the base and the bright color covering prevent over-heating. Large window of one meter width the edge of sphere allows freely observations using telescopes of up to 90cm diameter. Observation window is designed so that the telescope had clear view of the zenith. Rotation of the dome is provided by a base placed track, it rolls thanks to 16 plastic rollers system.
Driving system of the dome is made of two silent low power engines supplied from the 230V. One controls the dome’s rotation, the second allows you to open and close observation window. Special encoder mounted on a circuit of the dome cooperates with the dedicated driver which constantly measures the location of the dome and adjusts the engines’ work respectively to the position of the telecope.
All our domes are initially assembled and tested in our factory and then dismantled and carefully prepared for transportation.
Scopedome 2M
Basic Data
- diameter of the dome: 2000 mm
- shutter width: 590 mm
- dome height: 1400 mm
- diameter of the base: 1940 mm
- diameter of the outer base ring: 1940 mm
- diameter of the inner base ring: 1820 mm
- weight (with pallet): ~ 250 kg
Height with dedicated tower
- tower H80 : 2340 mm
- tower H120 : 2615 mm
Scopedome 3M V3
Basic Data
- diameter of the dome: 3000 mm
- shutter width: 1000 mm
- dome height: 2400 mm
- diameter of the base: 2760 mm
- weight (with pallet): ~350 kg
Scopedome 4M
Basic Data
- Dome diameter: 4000 mm
- Shutter width: 1170 mm
- Dome height: 2960 mm
- Diameter of the base ring: 3500 mm
- Height of the base: 1100 mm
- Fully automated driving systems
for dome rotation and the shutter - DomeDome weight: 800 kg
The dome is made up of 8 basic elements – it strongly facilitates transport and the assembly on the high buildings. Large window of 1.117 meter width the edge of sphere allows freely observations using telescopes of up to 120cm diameter. Observation window is designed so that the telescope had clear view of the zenith. Rotation of the dome is provided by a base placed track, it rolls thanks to 16 plastic rollers system
Scopedome 5.5M
Basic data
- Diameter of the dome: 5500 mm
- Width of the shutter: 1700 mm
- Height of the dome: 3800 mm
- Diameter of the base ring: 5000 mm
- Height of the base: 1100 mm
- Fully automated driving systems
for dome rotation and the shutter - Dome weight: 1500 kg
The dome is made up of 9 basic elements – it strongly facilitates transport and the assembly on the high buildings. Large window of 1.7 meter width the edge of sphere allows freely observations using telescopes of up to 150cm diameter. Observation window is designed so that the telescope had clear view of the zenith. Rotation of the dome is provided by a base placed track, it rolls thanks to 16 plastic rollers system
Installation Site
Scopedome telah digunakan di sejumlah Perguruan Tinggi dan menjadi standar observatorium Kampus.
A Title to Turn the Visitor Into a Lead
This is your chance to emphasize why the visitor should contact you right now.